Eliminate costly multi-valve assemblies and reduce installation time by 40% with our NSF/ANSI 372-certified 4 way ball valve. Designed for chemical processing, HVAC, and oil & gas applications – same-day technical support from 10+ year engineers.
When your process demands reliable directional flow control, an inefficient valve setup can cost you time, money, and operational safety. Here are the pain points our customers in the USA and globally experienced before switching to the four way ball valve from Thriveon:
Using multiple two-way valves to achieve cross flow or mixing functions increases material and labor costs. A single 4 way ball valve eliminates 3 extra valves and 12 additional pipe joints.
Ball valve port configuration in traditional multi-valve setups requires shutting down the entire line. A four way ball valve allows 90° rotation switching without system downtime.
Every extra joint is a potential leak path. Our 4 way ball valve integrates all flow paths into one machined body – tested to API 598 standards with zero leakage.
Procuring multiport ball valves from unknown suppliers often results in inconsistent quality and 8-12 week delivery promises. Thriveon ships 95% of orders within 4 weeks from our ISO 9001 factory.
Many four way ball valves lack standardized mounting pads for actuators, making automation integration expensive. Our valves feature ISO 5211 mounting pads for direct actuator deployment.
Low-cost imports often fail after 6-12 months due to seat deformation or stem leakage. Thriveon's PTFE seats and blowout-proof stems deliver 5x longer service life.
Data based on customer feedback and field studies across 47 industrial facilities (2021-2025).
Our four way ball valve (also known as 4 way ball valve or cross flow ball valve) is designed to handle mixing, diverting, and shut-off in a single compact unit. Built in our 25,000 sqm factory in Northern China, each valve undergoes 100% pressure testing and dimensional inspection.
Specially machined ball with four ports enables fluid to flow from inlet to outlet in two independent flow paths simultaneously – ideal for heat exchangers, reactor cooling, and batch processing.
See flow pattern diagram →Compliant with API 6D and ISO 17292 standards. Stem retention shoulder prevents accidental ejection under pressure, and anti-static springs ensure electrical continuity for hazardous environments.
Modify port sizes (6mm-150mm), end connections (threaded, flanged, BW, SW), materials (WCB, CF8, CF8M, 316L), and seat materials (PTFE, PPL, Nylon). Minimum order quantity just 5 pcs for custom specs.
With 500+ tons of raw material inventory and 40+ CNC machining centers, our standard delivery is 20-30 days. Express orders (10-15 days) available for urgent requirements.
Our engineers calculate torque values, recommend actuator sizing, and provide CAD drawings within 8 business hours – no charge, no obligation.
Certificates include CE, RoHS, ISO 9001, and API 6D available. BV/SGS/TÜV inspection is welcomed at the factory – we cover the local transportation cost.
| Parameter | Standard Model | Custom Model |
|---|---|---|
| Size Range | DN15 – DN200 (½" – 8") | DN6 – DN300 (¼" – 12") |
| Pressure Rating | PN16 / PN25 / Class 150 / Class 300 | PN40 / Class 600 |
| Body Material | WCB (Carbon Steel), CF8 (304 SS) | CF8M (316 SS), Duplex (2205), Super Duplex |
| Ball & Stem Material | 304 SS / 316 SS (passivated) | 316L, Monel, Hastelloy C276 |
| Seat / Seal Material | PTFE (max 200°C) | PPL (max 260°C), Nylon (max 120°C) |
| End Connection | Flanged (ASME B16.5 / EN 1092-1) | Threaded (NPT/BSPT), BW, SW, Clamp |
| Operation | Lever handle (DN15-80), Gear (DN100-200) | Pneumatic actuator, Electric actuator, Hydraulic |
| Testing Standard | API 598 / ISO 5208 (Rate A – zero leakage) | API 6D / BS 6755 (firesafe optional) |
| Certification | CE, RoHS, ISO 9001:2015 | API 6D, ATEX, SIL 2, FDA (upon request) |
electric ball valve 4 electric 3 way ball valve manual ball valve
A Texas chemical plant replaced 3 gate valves and 2 check valves with a single motorized 4 way ball valve, reducing cooling circuit pressure drop by 31% and saving $2,800/year in energy costs.
A 500,000 sq. ft. commercial complex in New York uses 6-inch four way ball valves from Thriveon for zone temperature control. The cross flow design allows simultaneous hot/chilled water blending without thermal shock.
An operator in Saudi Arabia uses our 4 way ball valves to divert pigging flow between main line and bypass. The blowout-proof stem and anti-static design meet their safety-critical requirements.
📩 Need a custom configuration? Send us your process parameters and we will provide a technical proposal within 24 hours.
Submit Your InquirySince 2018, Thriveon Valve has supplied four way ball valves to over 200 industrial facilities across North America, the Middle East, Europe, and Africa.
"We evaluated three suppliers for 4 way ball valves. Thriveon's delivery was 4 weeks versus 10-12 from the European manufacturer. The valves have been running 24/7 for 14 months with zero leaks. Their torque calculations for our pneumatic actuator were spot-on."
"The four way ball valve with flanged ends we ordered from Thriveon handles 180°C steam in our reactor bypass line. The machined ball seat surface is excellent – after 8 months, leak rate is still below 0.01%. Their after-sales team also helped us with actuator mounting drawings."
"We needed a custom 4 way ball valve with 316L body and NPT threaded ends for our filter manifold. Thriveon completed the design in 3 days and shipped within 3 weeks. The quality matches valves we previously bought from Italy at 40% lower cost."
"Thriveon's ISO 9001 certification and willingness to accommodate SGS inspection gave us confidence. We installed 18 four way ball valves at our power station for ash handling. After 2 years, only 1 valve required seat replacement – excellent reliability for the price point."
Common queries from procurement managers and engineers evaluating 4 way ball valve suppliers. Click each question for a detailed answer.
A four way ball valve (also called a 4 way ball valve or cross flow ball valve) is a multiport valve with four ports in a single body. The ball inside has a specially machined passage that allows two independent flow paths simultaneously – typically forming an "X" or "L" pattern. By rotating the stem 90°, the flow direction can be changed. It is used for mixing two inlet streams into one outlet, diverting one inlet into two outlets, or isolating one line while allowing cross flow between the other two. Common applications include heat exchanger bypass, reactor cooling, and filter backwashing systems.
For a typical cross flow application requiring 4 two-way valves, the total cost including valves (4 pcs), pipe fittings, gaskets, and labor is usually 60-80% higher than a single four way ball valve. For example, a DN80 (3") flanged 4 way ball valve in WCB material from Thriveon costs approximately $280-$450 FOB, while the equivalent 4 two-way valves + fittings would cost $650-$1,100 plus additional installation time. You also gain the benefit of fewer leak points and reduced maintenance.
At Thriveon Valve, our standard lead time for 4 way ball valves is 20-30 days for DN15-DN200 sizes in standard materials (WCB, CF8, CF8M). For express orders with a 15-day delivery, we charge a 10% surcharge. Custom sizes, special alloys (duplex, Hastelloy), or custom end connections may require 30-45 days. We maintain 300+ units of popular sizes in semi-finished inventory to accelerate delivery. All orders are shipped via sea freight (30-35 days to US West Coast) or air freight (5-7 days) per your preference.
Yes. We can machine 4 way ball valves using 316L stainless steel with FDA-compliant PTFE seats and EPDM seals. Our factory has experience supplying valves for dairy, beverage, and pharmaceutical applications in the US. We can provide certificates of compliance with FDA 21 CFR 177.1550 and USP Class VI testing reports. The internal surface finish can be reduced to Ra ≤ 0.8 μm for improved cleanability. Please specify food-grade requirements when requesting a quote.
Absolutely. All Thriveon four way ball valves from DN40 (1½") and above are manufactured with ISO 5211 mounting pads as standard. For DN15-DN32 sizes, we can add a custom mounting bracket upon request. We offer pneumatic actuators (double-acting or spring-return) and electric actuators (on/off or modulating) sourced from our partner factory – all pre-tested before shipment. We provide complete torque calculations and mounting kits for seamless integration.
Our standard PTFE-seated four way ball valves are rated for -20°C to 200°C (-4°F to 392°F) with pressure up to 16 bar (232 psi) for Class 150. PPL seats extend the temperature range to 260°C (500°F). For high-pressure applications, we offer Class 300 (50 bar/725 psi) and Class 600 (100 bar/1,450 psi) options. Cryogenic service down to -196°C (-320°F) is possible with extended bonnets and special seat materials. Always confirm your temperature and pressure conditions with our engineering team.
Each order includes: (1) Packing list, (2) Commercial invoice, (3) Bill of lading, (4) Hydrostatic test certificate, (5) Pneumatic test certificate, (6) Material test certificate (MTC traceable to our foundry), and (7) Certificate of Conformance. Additional documents such as API 6D certificate, NACE MR0175, or third-party inspection reports (by SGS/BV/TÜV) are available at cost. For customs clearance in the US, we ensure all documentation complies with US import regulations, including Section 301 tariff classification support.
We ship via sea freight (FOB Tianjin or Shanghai, CIF/C&F to your port) or air freight (DAP to your warehouse). For the US market, we have a logistics partner that consolidates LCL shipments for cost optimization. Typical transit time to Los Angeles is 18-22 days by sea; to New York it's 28-32 days. We provide tracking information within 24 hours of departure. For urgent orders, express air freight can deliver to major US airports in 5-7 days. Customs clearance support is available – we share HS code 8481.80.5090 for ball valves.
Still have questions? Our engineering team is ready to help. Email us or call +86-311-86935302.
Join 200+ satisfied industrial customers who have reduced valve procurement costs by an average of 35% while improving system reliability.
⏳ Limited Time: Free torque calculation and actuator sizing for first 20 inquiries this month.
📱 Also available on WhatsApp (click the contact page link above to chat). Privacy Policy: Your data will only be used to respond to your inquiry.
Unedited feedback from customers who bought and installed our four way ball valves in their facilities. Names and industries are provided with permission.
"Ordered 6 pcs of DN100 (4") four way ball valves in CF8M for our chemical transfer system. The machining quality was impressive – the ball surface had a mirror finish. Installed them 5 months ago, all working perfectly with pneumatic actuators. Would definitely reorder."
"We were skeptical about buying valves from China, but Thriveon changed our perspective. The 4 way ball valve we received had accurate dimensions, proper pressure test reports, and all documents were bilingual (English/Chinese). We saved 42% compared to our previous Italian supplier."
"I'm a maintenance contractor for a beverage plant. We needed a 4 way ball valve for CIP (clean-in-place) flow diversion. Thriveon's team helped us select the right size and seat material. The valve was delivered in 18 days – faster than any local distributor could. 10/10 service."
"We purchased a batch of DN80 4 way ball valves with electric actuators for our HVAC central plant. The valves work precisely for mixing hot and chilled water. The customer support team helped us with wiring diagrams for the actuator. Very satisfied with the entire experience."
Senior Valve Application Engineer – Thriveon Valve Co., Ltd.
James has 14 years of experience in the industrial valve industry, with a focus on multiport and automation valve solutions. He has led over 80 valve selection and troubleshooting projects across chemical, oil & gas, and water treatment sectors in North America, Europe, and the Middle East. James holds a B.Eng. in Mechanical Engineering from Hebei University of Technology and is a member of the Valve Manufacturers Association of China (VMAC). He contributes regularly to industry publications on valve selection best practices.
Related Products
Call us on:
+86-311-86935302
+86-311-86935302
Email Us:
info@thriveonvalve.com
South of Huanmadian Village Town, Ningjin County, Xingtai, Hebei Province, China 
