Nov . 09, 2026 04:59
A cast iron flanged gate valve must match the pipe standard, pressure designation, flange facing, nominal diameter, and installation space. Our ZMIN-D41 has a ductile iron body, DN40 to DN600 dimensions, and American or DIN connection arrangements. Check its isolation duty, seating choice, bolt pattern, face-to-face length, and operating height before sending a quotation request.
Body and service compatibility: ductile iron body, fully open or fully closed shutoff duty, and metal-seated or resilient-seated configuration.
Connection and dimensional fit: American or DIN pipe standard, applicable pressure designation, RF, FF, or RTJ facing, DN40 to DN600 size, face-to-face length, flange dimensions, bolt pattern, and overall height.
The ZMIN-D41 is a ductile iron body flanged gate valve. Specify that body material clearly in your purchase request, even when your search begins with the phrase cast iron flanged gate valve. This keeps the material requirement aligned with the product you are considering.
A gate valve is for shutoff service. We supply the ZMIN-D41 for fully open or fully closed positions, such as isolating a pipeline section for maintenance or controlling flow between operating zones. It is not a regulation valve, so a line that depends on continuous throttling needs a different valve arrangement.
The pipe standard should be settled before you choose the nominal diameter. The ZMIN-D41 supports American standard pipe systems through AWWA configurations and DIN standard pipe systems through DIN configurations. The pressure choices differ by configuration: AWWA versions can use Class 125/150, PN10/16, or 5K/10K/16K, while DIN versions use PN10/16.
Use the designation required by your piping system and purchasing documents. A nominal diameter match does not make two pressure designations interchangeable. Include the pipe standard, nominal diameter, and pressure designation in the same inquiry.
Flange facing is another connection check. The ZMIN-D41 is available with RF, FF, or RTJ facing. Choose the facing that matches the mating pipe flange and write it into the valve description with the size and pressure designation.
The ZMIN-D41 dimensions include face-to-face length L, flange outside diameter D, bolt-circle diameter K, bolt-hole arrangement n-d, and overall height H. These measurements cover both the joint connection and the space needed above the pipeline for operation.
For a DN100 replacement, the dimensions are L 190 mm, D 220 mm, K 180 mm, an 8-18 bolt-hole arrangement, and H 327 mm. A DN300 valve has L 270 mm, D 445/460 mm, K 400/410 mm, n-d 12-22/12-26, and H 695 mm. At DN600, the height is 1190 mm, with L 390 mm, D 780/840 mm, and K 725/770 mm.
Picture the replacement in its working location. Measure the existing face-to-face distance and bolt circle, then check the overhead clearance for the handwheel and stem area. A DN100 installation needs 327 mm of valve height, while DN300 and DN600 installations require substantially more room. Send a connection drawing or measured envelope with the quotation request when access around the line is limited.
The size range runs from DN40 to DN600. The smaller end includes DN40, DN50, DN65, DN80, DN100, DN125, and DN150, followed by larger sizes through DN600. Choose the nominal diameter to match the pipeline, then confirm the face-to-face and flange dimensions for the selected size.
The DN40 valve has L 140 mm, D 150 mm, K 110 mm, a 4-18 bolt-hole arrangement, and H 215 mm. These dimensions help with a compact flanged section, but the mating flange and operating clearance still need to fit. For larger lines, flange outside diameter, bolt circle, and valve height can affect supports, access, and nearby equipment.
The ZMIN-D41 family can be metal seated or resilient seated. Choose the seating arrangement according to the fluid service and shutoff requirements for the pipeline. Include this choice in the inquiry instead of leaving it implicit.
A metal-seated or resilient-seated option does not change the need to match the pipe standard, pressure designation, facing, and dimensions. Treat seating as a separate specification line so the requested valve configuration is clear.
The ZMIN-D41 suits a flanged isolation point where the line falls within DN40 to DN600, the connection follows an applicable American or DIN arrangement, and the valve will operate fully open or fully closed. It is a practical candidate for pipeline sections that need isolation during maintenance or system control.
Choose another valve arrangement when the duty requires continuous flow regulation. The ZMIN-D41 also needs a different selection if the pipe size, pressure designation, flange facing, bolt pattern, or installation envelope falls outside the available configuration. Send the line standard and measured connection details so we can review the requested combination.
The main parts are the valve body, seat, disc, spindle, gland, and operating wheel. Together, these parts provide the flanged flow path and the mechanism for moving the gate between open and closed positions. Include the operating arrangement in your equipment schedule when the valve location affects access for routine isolation work.
AWWA flanged gate valve configurations use the AWWA C509 and AWWA C515 standards. The ZMIN-D41 AWWA configuration can use Class 125/150, PN10/16, or 5K/10K/16K pressure designations. State the required AWWA configuration and pressure designation together so the connection selection matches the project documents.
A DIN configuration uses PN10/16 pressure designations. Its connection arrangement is intended for a DIN standard pipe system, while AWWA configurations apply to an American standard pipe system. Put the DIN system requirement and PN10/16 designation in the same purchase description before the valve size is finalized.
The ZMIN-D41 is suited to a cast iron flanged gate valve search when your project needs a ductile iron body, flanged isolation, DN40 to DN600 sizing, and a compatible American or DIN connection arrangement. Send the nominal diameter, pipe standard, pressure designation, facing, seating choice, quantity, bolt pattern, and available height for a precise quotation review.
The company
As a leading valve supplier in Northern China, Ningjin Thriveon specializes in the production of butterfly valves, gate valves, globe valves, and check valves. We export a majority of our products to various countries, including the United States, Saudi Arabia, South Africa, and Italy. If you are looking for high-quality and durable valves, our website is an excellent resource.…
About Us ↗Visit company website ↗Related Products
Call us on:
+86-311-86935302
+86-311-86935302
Email Us:
info@thriveonvalve.com
South of Huanmadian Village Town, Ningjin County, Xingtai, Hebei Province, China